Fittings and accessories

Logo2.jpg (3607 byte)

ita2.jpg (15099 byte)

Name: UNY / UNM / UNF            Execution: EEx-d II B/C

Main characteristics:
The fitting of the series UNY / UNM / UNF are made in steel. They are composed of 3 elements that screw on and turn independently, and this allows the connection of rigid parts

The NP / EM series of nipples / couplings are zinc-plated steel

Except where otherwise indicated, the thread of the mouthpieces is the UNI 6125 type.
Upon request, the following types of thread are also available:

GK UNI 6125

UNI 338

ANSI B 2.1 NPT

ISO METRIC

PG ( according to table DIN 40430)

Materials available on request: Aluminium

Name: EYS / EZS            Execution: EEx-d II B/C

Main characteristics:
The specific function of the sealing fittings is to avoid the flame propagation along conduit runs

The fitting of the series EYS / EZS are made in aluminium

Except where otherwise indicated, the thread of the mouthpieces is the UNI 6125 type
Upon request, the following types of thread are also available:

GK UNI 6125

UNI 338

ANSI B 2.1 NPT

ISO METRIC

PG ( according to table DIN 40430)

Name: ECR 1 / ECR 2            Execution: EEx-d II B/C

Main characteristics:
The breather and drain valves of the series ECR are made in steel

The thread of the mouthpieces is the UNI 6125 type

Name: PLG / Ex-V            Execution: EEx-d II B/C

Main characteristics:
Male plugs PLG series with recessed exagonal key are made in nickelchrome plated brass

Except where otherwise indicated, the thread of the mouthpieces is the UNI 6125 type
Upon request, the following types of thread are also available:

GK UNI 6125

UNI 338

ANSI B 2.1 NPT

ISO METRIC

PG ( according to table DIN 40430)

Materials available on request:
Zinc plated steel, polyester resin

Name: DLG            Execution: EEx-d II B/C

Main characteristics:
Locknuts of the series DLG for cable glands "P" series, with tightness gasket, are made in nickelchrome plated brass

Except where otherwise indicated, the thread of the mouthpieces is the UNI 6125 type
Upon request, the following types of thread are also available:

GK UNI 6125

UNI 338

ANSI B 2.1 NPT

ISO METRIC

PG ( according to table DIN 40430)

Name: Pull elbows LBH series           Execution: EEx-d II B

Main characteristics:
Body and cover in aluminium alloy
Degree of protection : IP-65 (by silicon grease)
Not painted
Except where otherwise indicated, the thread of the hubs is UNI 6125
The following types of thread are also available, upon request:

ANSI B 2.1 NPT

ISO METRIC

PG ( according to table DIN 40430)

On request:

Stainless steel screws

C03_GBCO.gif (39455 byte)

Italsmea S.p.A.
Via Per Cernusco, 15
20060 Bussero (MI) - Italy

Tel./Pho. 39-02-9500151
Fax. 39-02-95039102